Enidine OEMXT 2.0M X 4 Adjustable Shock Absorber. M64 x 2.0 - 100mm Stroke. Multiple Orifice
Enidine OEMXT 2.0M X 4 — adjustable shock absorber, M64 x 2.0, 100 mm stroke, 4 520 Nm/cycle.
Overview
The Enidine OEMXT Xtreme Series are adjustable mid-bore hydraulic shock absorbers with a one-piece hardened body and metallic rod seal for long life in demanding, high-cycle applications. A single external adjustment sets the damping across the full stroke.
Enidine OEMXT 2.0M X 4 (part number MF22194): M64 x 2.0 thread, 100 mm stroke, up to 4 520 Nm per cycle, 362 000 Nm/h, maximum reaction force 51 000 N, maximum propelling force 6 660 N, mass 4.9 kg. Adjust in small increments from the highest setting until the load stops smoothly without bottoming out. Foot mounts, clevises, flanges and stop collars are available as accessories.
Typical applications: Deceleration of moving loads — factory automation, packaging, material handling.
Operating conditions: Hydraulic (sealed, self-contained); -12 °C to +66 °C.
Genuine ITT Enidine product supplied by Applied Group, ITT Enidine's distributor in South Africa. Full technical data, dimensions and sizing curves are in the attached catalogue extract.
Specifications
| Series | Enidine OEMXT 2.0 |
|---|---|
| Model | OEMXT 2.0M X 4 |
| Type | Adjustable shock absorber |
| Thread | M64 x 2.0 |
| Stroke | 100 mm |
| Max energy per cycle | 4 520 Nm |
| Max energy per hour | 362 000 Nm/h |
| Max reaction force | 51 000 N |
| Max propelling force | 6 660 N |
| Optimal impact velocity | 0.3–3.5 m/s |
| Mass | 4.9 kg |
| Temperature range | -12 °C to +66 °C |
| Working media | Hydraulic (sealed, self-contained) |
| Application | Deceleration of moving loads — factory automation, packaging, material handling |
| Catalogue reference | ITT Enidine Shock Absorbers, Rate Controls & Wire Rope Isolators (A4 EN), p.32 |
Enquire about this part
The fastest way to get a price on this SKU is to email our quote desk — your reply lands with an engineer within 4 business hours.
Email a quote request Or use the quote form →
